Glass Edge Polishing

Two straight line edger machines have enhanced the groups capability, providing flat polish and polished chamfer on either float or laminated glass in thicknesses from 3mm to 25mm. In addition to a standard finish, these machines can also provide a highly polished finish using cerium oxide.

There is also the capability of a pencil rounded finish on 4mm and 6mm substances.

Glass Edge Bevelling

AC Yule's state-of-the-art bevelling machine which is capable of producing bevels from 15mm to 60mm wide in glass substances from 3mm to 19mm. Minimum size of glass which can be bevelled is 35mm x 35mm and the maximum size is 3000mm x 2000mm. The machine is capable of double and even triple bevels!

Shaped Polishing and Bevelling

In addition to straight line polishing and bevelling, standard shapes such as circles, ovals, dome and arch tops can all be produced on the shape edge working machine. More intricate shapes can be done using a free-hand facility.

Glass Edge Mitring

Glass edge mitres from 22.50 to 450 in both float and laminated glass can be produced.

Glass Drilling, Notching and Cut-outs

Holes and counter sunk holes can be drilled from 3mm to 100mm diameter. External notches, internal notches and cut-outs can be carried out in substances from 3mm to 25mm.

Brilliant Cutting, Finger Grips

Designs can be cut from the glass surface using a variety of wheels from a 3mm "v" wheel to a 25mm buff wheel. Sunk finger grips can also be cut into the glass surface to a standard size.

Resin Laminating

Within the company there is the capability to produce resin laminated panels. A cold poured resin mix cures solid between two pieces of glass. This is used for specialist panels such as thick substances laminated together for applications such as pavement lights, stair treads and dance floors.

Resin laminating can also be used for sound reduction where the resin interlayer is increased in thickness to absorb high sound levels.

See our Projects information about our completed projects (this information can be viewed by date, contractor, location or project type) or further Capabilities information.